Many companies both large and small are now going with commercial spray foam insulation to keep their establishments from leaking air in the summer and winter. The product can be installed a qualified professional contractor and it can do wonders to keep electricity bills from skyrocketing in the hot months of the summer. It can also save money in the winter, when it seems the only choice is to crank the heater up. Commercial spray foam insulation is different from other products in several ways and understanding how it works can give you a better idea of why it is probably the best product out there when it comes to keeping a business insulated.

The professional installation team uses a multitude of tools to apply the commercial spray foam insulation to the appropriate areas. This is usually in the ceilings or attics of the establishment. Once this material is exposed to oxygen it begins to expand in a chemical reaction. This allows it to get down into tiny cracks where traditional types of material, such as fiberglass, will not go. When wet, it has the potential to expand up to ten times its original size. This method of application also allows the professionals to get it into places that normally would have to go without coverage.

Commercial spray insulation compares favorably to other forms because it creates a completely air tight seal in the area it is applied. While other, more commonly used materials may get the job done, this form of application can keep a business completely protected from cold or hot air coming from outside. While preventing this air from coming in, it also prevents the air inside from escaping. This creates a thermos-like effect and allows any enterprise to save money on their heating and cooling bills. Not to mention the benefits to the environment that comes with saving energy.

Gun foam is an essential tool for anyone involved in a construction project. It can be used to fill cavities and joints quickly and effectively. The foam is very easy to use and provides a professional finish to new builds and remodeling projects.  It is injected into tanks or cans and kept pressurized. When the foam is exposed to air it expands into a substance that is very sticky and is used to fill up gaps and will dry hard. It can be used as insulation and soundproofing and is the easiest way to fill cavities and holes. There are several different types of (including slow and fast rise) and these are designed for different projects.

These can come with their own applicator or you can use a special foam gun. These are very easy to use and will ensure a smooth, even application. To use the foam you need to thoroughly clean the surfaces you are going to be working with. Oils and dirt can reduce the adhesive property of the foam and cause it to ‘pull away’ slightly when it has dried. This will reduce the effectiveness of the insulation and sound proofing. It is also a good idea if you are working in the home to lay down some protective sheeting over floors and furnishings.

Once you have prepared the area are working on then you simply apply the foam into the cavity, gap or hole you want filled. This will expand at a ratio of around 8 to 1. Fill the hole slowly so that you can judge the expansion rate more effectively. This will prevent you from wasting foam or not applying enough. Most of the gun foams we offer meets ASTM E-84 flame spread requirements for caulks and sealants, cures within 24 hours and can be painted. Contact us today for all of your weatherization needs and restock your supply of gun foam.