Many projects that contractors undertake require filling, insulating and sealing. Foam Guns can make these tasks much easier and quicker. Foam guns allow construction personnel greater control over the product, resulting in preventing waste and improved accuracy. These tools are essential for any new build or remodeling project. The end result is always cleaner, faster and reliable for your job and the customer.

One positive of these foam guns are the re-usability. Simply, replace the foam canister in the foam gun and within no time you’re back on the job insulating. Remember, you should avoid applying foams and sealants in temperatures under 41 degrees Fahrenheit as this can negatively affect drying and adhesion.

Foam insulation is a hot item in today’s market and a great selling point for your business. Get your very own Foam Gun here!

Whatever the reason, almost every home owner has at one time or another purchased a tube of caulk. Over the last few years, much has changed in the world of caulk. Today, we can easily be overwhelmed by the number of compositions, colors, and containers. The primary goal of interior caulking is to seal against drafts along exterior walls and at intersections and prevent water intrusion at plumbing fixtures. A thin bead of caulk can also hide unsightly gaps and make joints easier to keep clean. Exterior caulk is good for shedding water and making your home more weather and draft resistant.

We offer different types of caulk but one of the most commonly used is latex caulk. Mainly because latex caulks are easy to work with. They are basically water-based caulks that are applied as a liquid. They have the least ability to stretch and thus they work best on interior applications where little movement is expected. Nowadays latex is often combined with another type of caulk, like silicon for extra durability, adhesion, and to enhance their performance

One secret to an attractive and long lasting caulk job is good preparation and meticulousness. Surfaces should be very clean before caulking. To help produce a attractive application, mask off the surrounding area with tape. Always have cleaning materials ready. Never depend on caulk alone to fill a gap over 1/4 an inch. For gaps bigger than this, first insert with some closed cell foam backer rod, it comes in 3/8”, 5/8” and 7/8” diameters, and then fill with caulk.  How well caulk fills the gap also depends on environmental exposure, such as shifts in temperature, ultraviolet light, weather and building movement. Always carefully read the product label for application purposes. Contact us today to learn more about our weatherization products and refill your stock of caulk.

A major concern for many home-owners this fall is preparing for winter. Winter brings cold weather and higher energy bills for many home-owners across the United States. Take the opportunity to prepare your home this fall for the winter elements with these five energy saving tips.

1. Find energy leaks. To do this you’ll want to look for places with cracks and gaps that allow heat out and cold air in. Normally these are found around doors, windows and vents. You’ll want to use a type of weather-stripping or caulk to seal the frame. This will reduce the amount of heat flow being transferred through the open spaces allowing you to keep the warm air in and the cold air out.
2. Insulate. Limiting the amount of heat flow occurring within your home is vital to reducing the use of energy throughout your home. The United States Department of Energy recommends having at least adequate insulation in the following areas of your home.
   • Attic spaces
     • Attic access doors to unfinished attics
     • Knee walls in finished attics
   • Ducts in unconditioned spaces
   • Cathedral ceilings
   • Exterior walls
   • Floors above unheated garages
   • Foundations
     • Basements
     • Crawl spaces
     • Slab-on-grade floors
3. Close the fireplace flue when the chimney is not being used. A chimney is designed specifically for allowing smoke to escape. Keep it closed unless you’re using fireplace and you’ll not only save heat but also on your next energy bill.
4. Turn your water heater thermostat to 120° F for optimal usage and energy savings. Typically, water heaters come from the manufacturer set at 140°. Heating water is a major energy user and for each 10ºF reduction in water temperature, you can save between 3%–5% in energy costs.
5. Insulating your hot water heater can reduce standby heat losses by 25%–45%. This will save you around 4%–9% in water heating costs.

Check back soon for additional information on energy saving tips this winter.